found a 1/2 inch pvc pipe holder in hardware store and fit it to be a new mast ram with a 3/16 inc SS bolt and two nuts. one nut will hold pvc ram into the molded piece that stabilizes mast.
Cut down a 7/32" brass tube to about 1/2 inch and drilled ans set it through bulkhead. Set tube with wood epoxy inside and flush with outside bulkhead. Mast ram will sit inside this once set and i'll be able to adjust mast rake and fine tune better with other bolt. I also took some more detailed pics of insides where recessed pot will go to hold battery and receiver
No comments:
Post a Comment